基于NURBS的叶片全三维气动优化设计

采用NURBS对叶轮机械叶片的关键截面和基迭线进行参数化表达,该表达方法为基于现代优化算法的叶片粘性气动最优化设计提供设计变量,以实现对叶片截面和叶片基迭线弯、倾、扭、掠变形的控制。该方法编写成的叶片全三维控制模块和网格自动生成程序、CFD程序集成到商业软件iSIGHT中,构成了叶片全三维粘性气动优化设计平台。在该平台上选用ASA成功进行了某透平静叶片的全三维粘性气动最优化设计。实验结果表明通过同时改变叶片截面和叶片基迭线的方法能够有效地抑制叶片的二次流损失,因此该设计平台在叶片气动优化设计中有广阔的应用前景。     

塞曼石墨炉原子吸收光谱法直接测定垃圾焚烧废气中锡

采用钯加抗坏血酸溶液作为基体改进荆，用塞曼效应扣除背景，对消化后的垃圾焚烧废气滤筒直接进行测定。方法的检出限为100pg，线性范围为0．2～4ng，回收率为96．8％～102．0％。     

Relativistic Electromagnetic Solitary Wave in a Cylindrical Magnetized Plasma

In the presence of an applied static and uniform magnetic field, a cylindrical Kadomtsev-Petviashivili equation is derived for a relativistic electromagnetic solitary wave propagating in collisionless plasma consisting electrons, positrons, and ions in the case of weak relativistic limit. This equation is solved in a stationary frame to obtain explicit expression for the velocity, amplitude and width of solitons. The amplitude of the solitary wave has a maximum value at a critical αc of the ratio of the ion equilibrium density to the electron one, and it increases as the applied magnetic field becomes larger.     

稀土固体超强酸SO2-4/TiO2-La3+催化硝化甲苯的研究

研究了以固体超强酸SO2-4/TiO2-La3+作为催化剂,浓硝酸和甲苯为原料合成硝基甲苯,并考察了影响反应的因素.结果表明,催化剂用浓度为1.0 mol·L-1硫酸浸泡3小时,反应催化剂用量为硝酸质量的10%,反应时间为3小时,反应温度为55℃是最适宜的反应条件,甲苯转化率达90.14%,邻对比达0.89.     

Activation and Afterheat Calculation Analysis for TBM

Safety considerations of TBM are part of the design process to ensure that the TBM do not adversely affect the safety of ITER. So accurate calculations of all radioactivity and potential harmfulness are very important for designing of device, selecting of blanket and shield material, analyzing of the safety and environment, disposing of nuclear waste and operation of the reactor.     

Surface profile measurement of low-frequency vibrating objects using temporal analysis of fringe pattern

A simple and accurate algorithm (phase scanning method) is proposed for 3D surface contouring and dynamic response determination of a vibrating object. A sinusoidal fringe pattern is projected onto a low-frequency vibrating object by a programmable liquid crystal display projector. The fringe patterns are captured by a high-speed CCD camera with a telecentric gauging lens. Phase values are evaluated point by point using phase scanning method. From the phase values of each point on the object, the contour of the specimen at different instants of vibration can be retrieved. In this paper, a small vibrating coin is used to demonstrate the validity of the method and the experimental results are compared with test results on a stationary coin using four-step phase shifting and fast Fourier transform methods. The technique is especially useful in applications where the vibrating object has a complicated shape.     

双光束相干控制产生多次谐波的实验验证

利用两束相干度可改变的飞秒脉冲光对产生的五次谐波的强度特性进行了研究，发现谐波信号的强度随相干程度的增大而增加，谐波信号的最大值相对于相干零点(双光束相干度最大处)是非对称的，从而证明了合成的激光脉冲波形变化对谐波信号的影响.同时对谐波的受激放大理论进行了初步的实验探索和展望. 关键词： 五次谐波 波形变化 相干 受激放大     

对光磁共振实验中测量gF值的方法的评述和改进

对文献中测量gF因子的方法进行了评述，阐述了如何基于三角波扫场，用抽运信号确定计算和测量gF的方法。     

原子的吸收光谱和发射光谱的演示

介绍了利用光学多道分析仪和投影仪在课堂上实时演示原子的吸收光谱和发射光谱的实验方法。     

光参量啁啾脉冲放大增益特性研究

 通过对非线性三波耦合方程组进行数值求解，研究了光参量放大的增益特性及饱和放大特性。给出了泵浦光、信号光参数对参量增益的影响及其与晶体饱和长度的关系。且OPA具有传统CPA系统所不具有的优点，将有可能取代传统的CPA系统而作为超短超强激光系统的新型前端。